Abus NVR10030P - Network Camera Overview

18
Network overview
Click on the “ ” button in the menu below for an overview of all cameras in
the network. Click on the “Lock” icon to lock this display.
Mark all desired cameras to “Activate” them or “Add” them to the NVR.
Type: RTSP
Transmission protocol: Use the auto setting, provided that
there are no special requirements.
Port: Enter the RTSP port
Path: Specify the RTSP streaming path on the network
camera
Typical layout of an RTSP streaming path:
rtsp://192.168.0.1:554/video.h264
• Camera default password management
Here you can change the default password (assigned during
initial setup in the setup wizard). It is used for the QUICK
ADD function in the camera menu. Furthermore, “Inactive”
cameras can be activated using this password.
Enter the name of the camera you want to search for here
Displays the cameras in tile view
Displays the cameras in list view