50
Layout / display
Here you can specify the camera layout for the selected monitor.
Note: Watch out for possible limitations in the live view with regards to the local
decoding power of the recorder.
All-in-one stream (Channel-Zero)
Here you can enable the “All-in-one” stream. The recorder will then provide an
additional stream. The current image on the VGA monitor is then transmitted as a
combined “Image/stream” (it is no longer possible to select a camera in the stream).
This option is useful when you want an overview of all cameras but have limited
bandwidth for transmission.
Important:
Once the menu is opened on the VG monitor, only a black image is transmitted.
To Next Page
Loading...
