Abus NVR10030P - Add User Details

40
Add user
Click on the “+” symbol to add a user.
Editing a user
To change the settings for a user, first select a user and then click on the “Edit”
symbol.
The following changes can be made:
• User name
• Password
• User authorisation
• User MAC address
User name
Choose a unique name
Password
Choose a password
Note: change your passwords regularly, using a combination
of letters and numbers etc. and note them down to be stored
in a safe place.
Confirm
Confirm the password
User authorisation
Select the user’s authorisation level.
IMPORTANT:
More rights can be set on the Operator level than on the
Guest level.
User MAC address
Here you can enter the MAC address of the network adapter
from the PC used by the relevant user. The user can then
only gain access using this MAC address.