Abus NVR10030P - Manual Camera Adding

19
Manual adding / User-defined adding
Here you can manually add network cameras by entering the IP address and protocol
and specifying the port and user ID or adjust the settings of already added cameras.
You can also use this menu to add network cameras from other manufacturers,
ONVIF-compatible cameras and RTSP profiles.
Select a camera from the list and add to/change the corresponding parameters if
necessary
Alternatively, you can add cameras by clicking on the buttons in the menu above.
IP address
IP address of the camera
Protocol
Manufacturer communication protocol. For ABUS cameras, please
select ABUS as the protocol.
Port
Communication port of the camera (usually port 80 or 8000)
Transmission
protocol
Auto (recommended), UDP, TCP
User name
User name for the admin account of the camera
Password
Password for the admin account of the camera