Abus HDCC90000 - Alarm; Alarm Status Tab; Alarm Input Tab

Configuration
31
Alarm
Alarm Status tab
Here you can see a list of all the alarm inputs and outputs
and their current status.
Alarm Input tab
Parameter
Setting
Alarm Input
No.
Select the alarm input to adjust the
settings.
Alarm Name
Enter a clear description, e.g. warehouse
door contact.
Type
N.O.: normally open circuit
N.C.: normally closed circuit
 Activate the alarm input by ticking the "Settings" box.
 Define the response of the recorder in the event of an
alarm under "Settings".
 Click on Copy to apply these settings to other
cameras.
 Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
Settings
Trigger Channel tab
Tick the corresponding box to select which camera
channel is triggered in the event of an alarm.
Arming Schedule tab
 Define the time at which the responses selected in
the "Reaction" tab are activated when there is an
alarm.
 Click on "Copy" to apply these settings to other days
of the week or the entire week.