Technical data
60
Technical data
Subject to technical changes and correction without notice.
4 x HD-TVI / 4 x Analogue
1080P: 1920*1080/60 Hz, 1280*1024/60 Hz,
720P: 1280*720/60 Hz,1024*768/60 Hz
BNC Output:
PAL: 704×576, NTSC: 704×480
Resolution @ frame rate per
1920 x 1080 @ 25 fps, 1280 x 720 @ 25 fps, 640 x 480 @ 25 fps, 704 x 576 @ 25 fps, 352 x
288 @ 25 fps
Manual, time schedule, motion detection, alarm, VCA
By event, date and time, S.M.A.R.T., VCA
1 x RJ45 10/100/1000 Mbps
Simultaneous network access
Live view, playback, data export
Acoustic warning, OSD signal, email, CMS
USB mouse, remote control
English, German, French, Dutch, Danish,
Italian, Polish, Spanish, Swedish, Russian
<55 W (without hard disk drive)
≤ 4,5 kg without hard disk drive
HDD storage capacity
In addition to the physical storage capacity of the hard disk drive used, the storage space required for recording and
monitoring depends on the resolution set as well as the bit rate of the recording.
On the CD included in the delivery, there is a calculator for working out necessary used storage on a hard disk drive.
In addition, these software packages can also be found on our homepage for download.
Overview of connection combinations
It is possible to connect a SPOT monitor. Use the table below to find out what combinations are possible. A tick
indicates that the combination is possible, a cross shows that it is not.