13. Operation via web browser
Acknowledge an alarm by selecting the
red sub-area and con rming the prompt
for whether the alarm should be
acknowledged.
To reset the alarm panel, select the !
symbol that appears a er acknow-
ledgement in the triggered sub-area.
This action must also be con rmed via
aprompt from the alarm panel.
Obviously you can also "internally arm"
your system in the usual way. Simply
click the corresponding symbol (house
with padlock inside).
13.3.1 Hiding zones
Using the web interface, it is also possible to hide zones. This simply requires selecting the “Hide zones”
button, which will open a list of all the zones which can be hidden.
To Next Page
Loading...
