Abus SECVEST - Page 75

7474 75|
15. Technical data
Voice dialler
Receiver
8 Tel or VoIP/SIP ID
DTMF detection VoIP/SIP
Acknowledgement
RFC 2833
Codec VoIP/SIP
PCM G711 A law (RTP AV Prole 8)
ITU-T G.711 PCM A-Law audio 64kbit/s
Reference RFC 3551
SMS
Receiver
8
PSTN SMS protocol TAP 8N1, TAP 7E1, UCP 8N1, UCP 7E1, ETSI Protocol 1
Email
Receiver 8
Remote control by telephone Yes
ATS Alarm transmission system
Categories and classications
ATS (Alarm Transmission System)
categories, SPT (Supervised Premises
Transceiver) classication
The alarm panel contains an integrated SP2 (ATS2)
communicator to full the requirements of EN50131 for security
grade 2.
The alarm transmission system is compliant with
EN50136-1:2012 as an SP2 (ATS2) communicator.
The alarm panel supports options A, B and C for grade 2 as
given in Table 10 in EN50131-1:2006+A1:2009.
Classication of transmission time D2 -> SP2
Transmission time, maximum
values
M2 -> SP2
Classication of notication time T2 -> SP2
Classication of availability
A0 (no requirement)-> SP2 (optional)
There is no method for achieving compliance with EN 50136-
1:2012, 6.7.3 (non-availability of the alarm transmission system)
because A0, no requirement.
Security to prevent removal
S0 (no measures) -> SP2 (optional)
There is no method for achieving compliance with
EN50136-1:2012, 6.7.2 (redundancy) because S0, no measures.
Information security
I0 (no measures) -> SP2 (optional)
There is no method for achieving compliance with
EN50136-1:2012, 6.8.3 (information security) because I0,
nomeasures.