Machine Maintenance Procedures 3-21
5. Remove four (4) screws (G) securing the touchpad module in place (Figure 3-20).
Figure 3-20. Touchpad Module Screw Location
6. Lift up the touchpad bracket to remove the touchpad module (D) from the top
assembly (Figure 3-21).
Figure 3-21. Touchpad Module Removal
Touchpad FPC (Flexible Printed Circuit) can be damaged if removed while the
mainboard connector and touchpad connector are locked.
ID Size Torque Quantity Screw Type
G M2.0*2.5 2.0±0.2KGF/CM 4
To Next Page
Loading...
