Machine Maintenance Procedures 3-69
3. Connect the eDP cable (C) to the mainboard connector (D) (Figure 3-88).
4. Secure the eDP cable to the cable guides as shown in Figure 3-88.
Figure 3-88. eDP Cable Location
5. Secure the antenna cables to the hook (E) and along the cable guides (Figure 3-89).
6. Connect the WLAN MAIN antenna (black-color) to the WLAN pin 2 (Figure 3-89).
7. Connect the WLAN AUX antenna (white-color) to the WLAN pin 1 (Figure 3-89).
8. [For C732L & C732LT only] Connect the WWAN MAIN antenna (yellow-color) to the
WWAN pin 3 (Figure 3-89).
9. [For C732L & C732LT only] Connect the WWAN AUX antenna (blue-color) to the
WWAN pin 4 (Figure 3-89).
Figure 3-89. WLAN Antenna & WWAN Antenna Location
ID Size Torque Quantity Screw Type
F M2.0*4.0 2.0±0.2KGF/CM 4