Condential
2-15
H6500
2-11 Disassemble LVPS
module
1. Unscrew 6 screws (as red circle) to
disassemble the LVPS Module.
2. Unplug 3 connector (as red square).
3. Remove the cable and the AC Inlet
Bracket from LVPS module.
4. Remove the LVPS module and 1 black
mylar.
AC Inlet Bracket
NOTE: Circuit boards > 10 cm² has been
highlighted with the yellow rectangle
as above image shows. Please
detach the Circuit boards and follow
local regulations for disposal.
To Next Page
Loading...
