ACO 3233 - Page 35

34
6-5 Lp-value acquisition
3233 PC
＜Data＞
On P1 Command （6Byte+CR）
X110.0+CR
On P0 Command, All CH is sent.
X110.0+CR
Y110.0+CR
Z110.0+CR
6-6 Notes
・Flow control is not available in 3233.
・For communication command error, the
？
mark is returned.
・To return to Calibration, Stop measurement command E is used.
P1：Lp acquisition（XCH）
Data transfer
Data