Operator’s manual • X-Mind unity • VH • (15) • 09/2017 • NUN0EN010H
ENGLISH
WARNING
Whenusing the X-MIND unity together with the integrated Sopix/Sopix² Inside x-ray digital sensor, be extremely certain that the complete
sensor equipment and its holder are properly installed and safely connected to the X-Mind unity.
The Sopix/Sopix² Inside must always be well maintained and properly functional.
Always assure that the sensor holder is properly xed and the relevant support screws are properly tightened.
Always refer to the Operator’s Manual and to the Installation and Maintenance Manual of the Sopix/Sopix² Inside equipment.
CAUTION -
WARNING
NEVER operate the system with sensor cover or any other enclosure disassembled or assembled improperly. This can endanger the safety of
the patient and / or operator
Sopix/Sopix² Inside sensor holder properly installed
5.13. POSITIONING THE X-RAY GENERATOR AND COLLIMATOR (BEAM LIMITING DEVICE)
CAUTION -
WARNING
Before each examination, it is mandatory to use a disposable protecting sheath device over the collimator cone (Beam Limiting Device) that
is designed to cover the end part of the X-ray unit, which is more susceptible of being directly contaminated during the X-ray exposure (class
I Medical Device Directive 93/42/EEC and subsequent amendments). It can come into contact with the patient’s skin: verify biocompatibility
according to the principles given in the ISO 10993 series of standards. Refer for details to the disposable use protection’s instructions for
use.
Follow the standard intra-oral procedures, positioning the cone as well as referring to the graduated scale on the tube head.
To Next Page
Loading...
