7.1. RESTORING FACTORY VALUES
1. Press and hold the key for 5 seconds untill the “SET” message is shown on the display.
2. After a few seconds the name of the rst parameter is shown in the bottom of the display
3. Use the key to scroll through the parameters.
4. When the “TIME RESTORE parameter is displayed press the key to enter that parameter
5. The icons start blinking.
6. Use the keys to select «yes» or «no»
7. To restore the unit to the factory default settings select “YES” and press the key to conrm and save the selection.
8. Press the key to exit from the menu.
To Next Page
Loading...
