ActionTec SBWD100B User Manual

32
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.4. Modifying the Receiver’s Host Name
Follow the procedure below to modify your receiver’s host name:
1. Go to the Device Configuration tab page by clicking the Device Configuration tab.
2. Go to the Host name line, and type a new host name in the Host name box.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.

ActionTec SBWD100B Specifications

General

Brand	ActionTec
Model	SBWD100B
Category	Receiver
Language	English