Acuity Controls GR2400 User Manual

9. That’s it. Now, at the end of the schedule, the switch will start beeping to signal
that the lights will be shutting off shortly. If the user presses the override button
on the switch, the beep alert will stop, and the lights will stay on for an additional
2 hours (or whatever duration the Timer was set to in the Maintain+Blink Group).
At the end of this 2 hour period, the switch will start beeping again to signify the
lights will be shutting off, at which point the user can override the shutoff again
and start the cycle over again, or simply let the lights go off.
** The procedure just described can also be used to make the Locator LED blink. Just
replace “BEEP” in step 7 with “Locator”.
- 16 -
100

Acuity Controls GR2400 Specifications

General

Brand	Acuity Controls
Model	GR2400
Category	Relays
Language	English