! Important Programming Notes !
To use the advanced features of the new Chelsea Digital Switch, please ensure the
following:
• Always set a Chelsea Digital Switch as a “14 Button Switch” in the Panel/Switch
Types screen. This is true even if the switch only has 1, 2 or 3 physical buttons.
The reason for this is because advanced programming requires setting parameters
for buttons 7-14, even though they are “virtual” buttons and not physically present
on the switch.
• To access advanced programming functions of the Chelsea Switch, you must have
DTC clock version 4.48 or later.
• To use advanced programming functions of the Chelsea Switch, you must be
using switch firmware 1.12 or later. The version of firmware a switch has is
displayed in the lower left corner of the SETUP screen for that switch.
- 2 -
To Next Page
Loading...