ADC AD-330 User Manual

28
SELECTING TEMP SCALE
PRESS "MED" TO
ENTER PL #01
CONTROL SETTINGS
PRESS "HI" ONE (1)
TIME TO SCAN UP TO
TEMP SCALE
PARAMETER
PRESS "HI" OR "LO" TO
TOGGLE BETWEEN °F AND
°C.
PRESS "MED" TO
SELECT NEW TEMP
SCALE, AND ADVANCE
TO NEXT PARAMETER.
PRESS "MED" TO
ENTER TEMP
SCALE
PARAMETER
NOTE: PRESS "PAUSE" TO
EXIT PL #01 CONTROL
SETTINGS MEMORY
LOCATION
PRESS "MED" TO
ENTER PROGRAM
MENU
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
PROGRAM MODE
PL #01
CONTROL
SETTINGS
SELECT
LANGUAGE
SELECT TEMP
SCALE
°F
°C
SELECT BUZZER
MODE
READY, INSERT
0.25 ¢ TO START

ADC AD-330 Specifications

General

Brand	ADC
Model	AD-330
Category	Controller
Language	English