ADC AD-330 User Manual

36
SETTING LINT CLEANING FREQUENCY
PRESS "MED" TO
ENTER PL #02 MACHINE
SETTINGS.
PRESS "HI"
ONE (1) TIME
TO SCAN UP
TO PL #02
MACHINE
SETTINGS.
PRESS "MED" TO
ENTER LINT CLEANING
FREQUENCY
PARAMETER.
PRESS "HI" OR
"LO" TO
INCREASE OR
DECREASE LINT
CLEANING
FREQUENCY.
PRESS "MED" TO
SELECT LINT
CLEANING
SETTING AND
ADVANCE TO
NEXT
PARAMETER.
PRESS "MED" TO
ENTER
PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #02 MACHINE
SETTINGS MEMORY
LOCATION
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #02
MACHINE
SETTINGS
SELECT MODEL TYPE
3
5
AXIAL
THERMISTOR
READY, INSERT
0.25 ¢ TO START
LINT CLEANING
FREQUENCY 0 TO 10
HOURS
PRESS "HI" THREE (3)
TIMES TO SCAN UP TO
LINT CLEANING
FREQUENCY SETTING.

ADC AD-330 Specifications

General

Brand	ADC
Model	AD-330
Category	Controller
Language	English