ADC AD-330 - Clearing Credit

60
Flowchart for Clearing Credit
- Stop Dry Cycle by Opening
and Closing Door.
Do Not use the “PAUSE”
Key.
- Make Sure Program
Switch is Down.
- Enter the Following Key
Sequence
- While holding “PAUSE” at
all TIMES, press “HI” 3 times,
“LO” 2 times, and “MED”
once.
- Wait for Display to Say
CLEAR CREDIT?
- Hold PAUSE and press
“MED”.
Press and
Hold
READY, INSERT
$0.25 TO START
CLEAR CREDIT?
SELECT TEMP
TO RESTART