8230 Optical Power Meter Operation Manual
8.2.1 Sensor Specifications (Sold Separately)
8-6
821x series *7 (Sold separately)
Item Specification
Model 82324A/82324B (For 3 wavelengths)
Wavelength range 390
to 900 nm
Wavelength 405 nm 650 nm 780 nm
Power range
Display in dBm -50 to +20 dBm
Display in W 10 nW
to 100 mW
Beam spot 1 mm or more 3 mm or more
Light receiving element Si photodiode
Light receiving area Approx. 8.5 mm
Effective light receiving area *1 Approx. 6.5 mm
Calibration wavelength *2 Standard OPT82324B+22 OPT82324B+23
Measuring accuracy (when 1 mW is input)
2.5% (at calibration wavelength)
3.5%
(390
to 900 nm)
Wavelength sensitivity correction range 390
to 900 nm
Shape Cylindrical type
Dimensions (diameter) (height) mm
38
*1: Relative sensitivity to the center is within the 10 % range.
*2: Can be added by using options. (A calibration wavelength other than the standard specification can be
selected by using the calibration wavelength selection function.)
Model 82014A 82017A 82015
Wavelength range 400
to 1100 nm 400 to 1100 nm 800 to 1600 nm
Power range Display in dBm -60 to +17 dBm -60 to +17 dBm -40 to +10 dBm
Display in W 1 nW
to 50 mW 1 nW to 50 mW 100 nW to 10 mW
Beam spot Whole area
Light receiving element Si photodiode Ge photodiode
Light receiving area Approx. 8 mm Approx. 10 mm 10
mm
Approx. 5 mm
Measuring
accuracy
At calibration wavelength 5%
Calibration wavelength
Calibration power
850 nm
-20 dBm
850 nm
-20 dBm
1300 nm
-20 dBm
Wavelength sensitivity correction range 400
to 1100 nm 400 to 1100 nm 800 to 1700 nm
Shape Cylindrical type Thin type Cylindrical type
Dimensions (width or diameter) (height)
(thickness of the light receiving section)
mm
38 40 18 1803.2 38 40
*7: If OPT70 is installed in the 8230, the sensors can be used.
To Next Page
Loading...
Need help?
General
