ADCMT 8230 - Page 57

8230 Optical Power Meter Operation Manual
4.4 Measurement Data Output Format
4-7
4. Block delimiter
Mantissa and exponent when over range or under range is set
Refer to Section 4.6, “Remote Command.”
Block delimiter Setting command
Number of
characters
Initial value
CR+LF DL0 2
LF DL1 1
Number of
displayed digits.
Mantissa
Exponent
Number of
characters
dBm (dBr) W (RATIO)
Over range 5 1/2 +999.999
E+09 E+09
12
4 1/2 +999.99 11
3 1/2 +999.9 10
Under range 5 1/2 +999.999
E-09 -
12
4 1/2 +999.99 11
3 1/2 +999.9 10