8230E Optical Power Meter Operation Manual
1.5 Optical Power Meter Software Revisions and Applicable Optical Sensors
1-6
1.5 Optical Power Meter Software Revisions and Applicable Optical Sensors
The following table shows the software revisions required for optical sensor operations.
If the software of your optical power meter does not match the following revision, you are required to update
the software. Please visit our website, and download and install the applicable firmware.
NOTE: If the software revision of the optical power meter 8230E is not applied, "Err 2" or "Err 3" is displayed.
Table 1-4 List of Software Revisions Required for Optical Sensor Operations
Model name Software revision Model name Software revision
82311B D00 or later 82311 A00 or later
82321B D00 or later 82321 A00 or later
82313B D00 or later 82313 A00 or later
82323B D00 or later 82323 A00 or later
82014A C00 or later (+OPT70)
82017A C00 or later (+OPT70)
82015 *1 C00 or later (+OPT70)
82018A *1 C00 or later (+OPT70)
*1 Currently discontinued.
To Next Page
Loading...
Need help?
General
