as follows:
(6)Next, open the folder we provide to the user:
AdeeptRoboticArmforArduinoV3_5
Then open 01 Software Package.As shown below:
(7) Open the websocket folder.There is a file inside: GUI info v1.0.py.
(8) Double-click to open the GUI info v1.0.py file, and the following picture will
appear after opening:
(9) After opening the file, the following interface will appear. We need to record
this IP address, which will be used later: 192.168.3.69
To Next Page
Loading...
