ADLINK Technology MXE-5401 - Installing the Graphics Driver; Installing the Ethernet Driver

44 Driver Installation
x:\Driver Installation\Matrix\MXE-5400\Chipset
where x: denotes the DVD-ROM drive.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.2 Installing the Graphics Driver
This section describes installation of the graphics driver for the
MXE-5400. The MXE-5400 is equipped with the Intel
®
Graphics
Media Accelerator Driver package, which supports Windows 7.
To install the graphics driver:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The graphics driver
is located in the directory
x:\Driver Installation\Matrix\MXE-5400\Graphics
where x: denotes the DVD-ROM drive.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.3 Installing the Ethernet Driver
This section describes installation of the Ethernet driver for the
MXE-5400. To install the driver for the Intel 1210/1217 Gigabit
Ethernet controller:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The Ethernet driver
is located in the directory
x:\Driver Installation\Matrix\MXE-5400\LAN-Intel\
where x: denotes the DVD-ROM drive.
3. Execute setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.