Getting Started 41
MXE-5400
4. Once final assembly as shown is complete, mount the
MXE-5400 series controller on the wall via the screw
holes.
2.8 Cooling Considerations
Heat-generating components of the MXE-5400 (such as CPU and
PCH) are all situated on the left side of the system. These compo-
nents directly contact the heat sink via thermal pads and dissipate
heat generated by the components. To maximize efficiency of heat
dissipation, maintain a minimum of 2 inches (5 cm) clearance on
the top of the MXE-5400.
To Next Page
Loading...
