ADOBE PREMIERE PRO 2.0
User Guide
167
2 Position the current-time indicator at the edit point where the two clips meet. You can use the Next Edit and
Previous Edit buttons in the Program Monitor.
3 Choose Sequence > Apply Video Transition or Sequence > Apply Audio Transition, depending on the target track.
To specify a default transition
1
Choose Window > Effects and expand the Video Transitions or Audio Transitions bin.
2 Select the transition that you want to make the default.
3 Click the Menu button for the Effects panel.
4 From the Effects panel menu, choose Set Selected As Default Transition.
To set the duration of the default transition
1
Do one of the following:
• Choose Edit > Preferences > General.
• Click the Effects panel menu button. Choose Default Transition Duration.
2 Change the value for the Video Transition Default Duration or Audio Transition Default Duration, and then
click OK.
To replace a transition
❖ Drag the new video or audio transition from the Effects panel onto the existing transition in the sequence.
When you replace a transition, the alignment and duration are preserved; however, the settings for the old transition
are discarded and replaced by the default settings for the new transition.
See also
“To change transition settings” on page 171
Fine-tuning transitions
To display transitions in the Effect Controls panel
You can use the Effect Controls panel to change settings for a transition you placed in a sequence. Settings vary from
transition to transition.
To Next Page
Loading...