Adobe PREMIERE PRO 2 - Solarize Effect; Strobe Light Effect; Texturize Effect

ADOBE PREMIERE PRO 2.0
User Guide
340
Note: The Cycle control affects only the state of the fractal, not geometrics or other controls. For example, two identical
states of the fractal will not appear the same if viewed with different Size or Offset settings.
• Random Seed Specifies a unique random value from which to generate the roughness texture. Animating this
property results in flashing from one set of fractal shapes to another within the same fractal type. For smooth
transition of the roughness, use the Evolution control.
Note: Create new roughness animations by re-using previously created Evolution cycles and changing only the Random
Seed value. Typing a new Random Seed value alters the noise pattern without disturbing the evolution animation.
Solarize effect
TheSolarizeeffectcreatesablendbetweenanegativeandpositiveimage,causingtheimagetoappeartohaveahalo.
This effect is analogous to briefly exposing a print to light during developing.
Strobe Light effect
The Strobe Light effect performs an arithmetic operation on a clip at periodic or random intervals. For example,
every five seconds a clip could appear completely white for one-tenth of a second, or a clip’s colors could invert at
random intervals.
The Strobe Light effect has the following settings:
Blend With Original Specifies the intensity, or brightness, of the effect. A value of 0 causes the effect to appear at full
intensity; higher values diminish the intensity of the effect.
Strobe Duration Specifies in seconds how long a strobe effect lasts.
Strobe Period Specifies in seconds the duration between the start of subsequent strobes. For example, if the Strobe
Duration is set to 0.1 second and the Strobe Period is set to 1.0 second, the clip has the effect for 0.1 second and then
is without the effect for 0.9 second. If this value is set lower than the Strobe Duration, the strobe effect is constant.
Random Strobe Probability Specifies the probability that any given frame of the clip will have the strobe effect,
giving the appearance of a random effect.
Strobe Specifies how the effect is applied:
• Operates On Color Only Performs the strobe operation on all color channels.
• Makes Layer Transparent Makes the clip transparent when a strobe effect occurs.
Strobe Operator Specifies the arithmetic operator to use when Operates On Color Only is chosen from the Strobe
menu. The default setting is Copy.
Texturize effect
The Texturize effect gives a clip the appearance of having the texture of another clip. For example, you could make
theimageofatreeappearasifithadthetextureofbricks,andcontrolthedepthofthetextureandtheapparentlight
source.
The Texturize effect has the following setting:
Texture Placement Specifies how the effect is applied:
• Tile Texture Applies the texture repeatedly over the clip.
• Center Texture Positions the texture in the middle of the clip.
• Stretch Texture To Fit Stretches the texture to the dimensions of the selected clip.