ADT Network Camera User Manual

User’s Manual
10
 ONVIF Protocol: Check the box to enable the ONVIF protocol. The ONVIF protocol
is supported only for users belonging to the default user groups (Administrator, Operator,
User).
 Setup:
− Load Default Setup…: Click to return all settings except date/time to the original factory
settings. You can select whether or not network settings will be included when the setup
is applied. Refer to the Network setup for details of the network settings.
− Import Setup…: Click to apply the settings saved as a .dat file format to the camera. A
setup screen appears allowing you to select the setup file. You can select whether or not
to include network settings (except DVRNS setting) when the setup is applied. Refer to the
Network setup for details of the network settings.
− Export Setup…: Click to save the current camera settings as a .dat file format. A setup
screen appears allowing you to name the setup file.
NOTES:
 The Load Default Setup and Import Setup functions are permitted only to the users in
the Administrator group.
 Do NOT check the Include Network Setup box when the network settings of the setup
file are used in another camera. Otherwise, the connection to the camera might not
be made properly.
 If the IP address, admin port number or SSL settings are changed during Setup, Remote
Setup closes after saving the changes.
Date/Time

ADT Network Camera Specifications

General

Brand	ADT
Model	Network Camera
Category	Security Camera
Language	English