Network Camera
23
MAT
Check the MAT box to use the MAT (Motion Adaptive Transmission) function for video
streaming and recording.
Sensitivity: Set the motion sensitivity. The higher the number is, the more sensitive it is.
Inactivity Period: Set the inactivity period. The camera will transmit or record images
in Frame Rate set below until any change is detected after the inactivity period when
no motion is detected during the preset inactivity period.
Frame Rate: Select the frame rate to be applied when no motion is detected. The frame
rate of the secondary stream cannot exceed that of the primary stream, and the frame rates
supported for the secondary stream change depending on the frame rate of the primary
stream. The selected frame rate will be applied until any motion is detected after the
inactivity period and will return to the normal frame rate set during the Stream setup
immediately upon detecting any motion.
NOTE: The MAT (Motion Adaptive Transmission) function allows you to reduce bandwidth
overload and to save storage capacity by reducing the frame rate when no motion is
detected. The camera considers that no motion is detected when no change is detected
between two consecutive images based on the sensitivity setting.
To Next Page
Loading...
Need help?
General
