User’s Manual
32
−
or (One or All blocks): Click to select or clear one or all blocks at a time.
− (Area): Click to select or clear several blocks of an area.
Motion Ignoring Interval: Select the motion ignoring dwell time from the drop-down
list. The camera will not log or send notifications of motion events occurring during the
preset interval after a motion is detected. You can control excessive event logging and
remote notifications of motion detection events by adjusting the motion ignoring dwell
intervals.
Daytime: Set up the daytime range. The camera will consider the remaining time range
as the nighttime.
Event Action: Check the box for each action the camera is to take when it detects a motion
detection event.
− Send Email: Check the box to send an email. Selecting Image Attachment attaches an
event detected image file (.JPG) to the email. When in the dual stream mode, the image
attachment option is disabled.
− Remote Callback: Check the box and select the remote systems to send a message (Not
supported for the WebGuard program).
− Audio Alarm: Check the box and select the audio file (.wav) to sound.
− FTP Upload: Check the box to upload images to an ftp server. When in the dual stream
mode, this option is disabled.
− Record: Check the box to record video.
NOTE: You must properly configure the settings related to each event action when setting
them up to enable event actions. Refer to the Event Action setup.
Audio Detection
To Next Page
Loading...
Need help?
General
