ADT Network Camera User Manual

Network Camera
31
3.7 Event
You can set up event detection function.
Motion Detection
Check the Motion Detection box to set up a motion detection event. When the camera
detects a motion in a configured motion detection zone, it considers the motion as an event.
 Sensitivity: Set the motion sensitivity for daytime and nighttime independently. The
higher the number is, the more sensitive it is.
 Minimum Blocks for Detection: Adjust the minimum number of detection blocks that
must be activated in order to be considered as a motion event for daytime and nighttime
independently.
 Motion Zone: Click the Setup… button and a motion detection zone setup screen appears.
Define the area (max. four) of the image that you want to set up a motion detection zone
by using the motion detection zone icons.
− (Select) or (Clear): Click to select or clear a block for motion detection. You can select
or clear the several blocks of an area using the mouse dragging.

ADT Network Camera Specifications

General

Brand	ADT
Model	Network Camera
Category	Security Camera
Language	English