User’s Manual
28
FTP Upload
Check the FTP Upload box to upload event detected images in JPEG file format to an ftp
server.
FTP Server: Click the Add button to register an ftp server. Clicking the Remove button
deletes the registered ftp server. When an event is detected, the event detected images
will be uploaded in JPEG file format to the ftp server registered as a primary server. If
images fail to be uploaded to the primary server, they are uploaded to the secondary server
until uploading to the secondary server fails.
− FTP Server: Enter the IP address (or domain name)
of the ftp server.
− Upload Path: Enter the folder path to upload files.
Special characters (\ # * | : " < > ?) cannot be used
in the folder path.
− Port: Enter the port number of the ftp server.
− User ID, Password: Enter the user ID and password
for the connection to the ftp server.
Click the Test button to check the connection to the ftp server with the information set above.
When the test succeeds, click the OK button.
Image: Set up the image and upload settings for ftp upload.
− Upload Type: Select the upload type. When the upload type is set to Always, images
will be uploaded to the ftp server according to the settings below regardless of the event
detection. When the upload type is set to Event, images will be uploaded to the ftp
server according to the settings below when events are detected.
To Next Page
Loading...
Need help?
General
