Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 172 -
system alarm
017 Spindle Auto Open
Range : OFF ON
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : To set to automatically start the spindle when system executes the
machining program
018 Spindle Auto Stop
Range : OFF ON
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : To set to stop the spindle automatically when the system machining
program ends.
019 Analog spindle encoder a loop pulse number
Range : 0~10000000
Unit : None
Authority : Operation admin or higher
Default : 2500
Effective time : Instant
Note : The received wire number of the encoder when the spindle rotates one
circle;
Same as common axis encoder, it can only receive AB phase pulse, and
thus the wire number of the encoder must be pulses of one circle divided
by 4.

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English