OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
16
Wiper Ring Location Tab
Turntable
Probe Wiper Ring
Figure 1.7: Turntable and Wiper Ring
• Place the evaporation cover (logo side facing up) over the center knob of the turntable
with the squared shaped open slot centered at turntable position 1 (Figure 1.8), and
facing the instrument.
• Grasp the turntable by the center knob and place it on the turntable spindle so the flat
side of the evaporation cover fits into the opening in the instrument cover.
Center knob and turntable Locking Screw
Evaporation Cover
Figure 1.8: Evaporation Cover
To Next Page
Loading...
