OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
48
7.4.1 Audio
This tab is where the user can change the audio options. (Figure 7.9)
The click tone can be changed by choosing one of the four options. The click tone is the sound
played when the user touches a button on screen.
• To select and preview a tone and/or volume, press the corresponding radio button to
play the sound.
• Press TEST ERROR SOUND to play the error sound.
• Press SAVE to save settings changes.
• Press EXIT to return to the Settings screen.
Figure 7.9: Hardware Options Audio
7.4.2 LCD
This tab is where the user can adjust the LCD brightness level. (Figure 7.10)
Use the slider bar to set the desired brightness level. The user can preview various brightness
levels.
• Once the desired level is selected press SAVE.
• Press EXIT to return to the Settings screen.
To Next Page
Loading...
