EasyManuals Logo

Advantech ASMB-813I User Manual

Advantech ASMB-813I
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
ASMB-813I User Manual 44
Legacy USB Support
This is for supporting USB device under a legacy OS such as DOS. When
choosing "AUTO", the system will automatically detect if any USB device is
plugged into the computer and enable USB legacy mode when a USB device is
plugged and disable USB legacy mode when no USB device is plugged.
XHCI Hand-off
Enables or disables supporting an OS without XHCI hand-off feature.
The XHCI ownership change should be claimed by XHCI driver.
EHCI Hand-off
This is a workaround for OS without EHCI hand-off support. The EHCI owner-
ship change should be claimed by EHCI driver.
USB Mass Storage Driver Support
Enable/Disable USB mass storage driver support.
USB Transfer Time-out
Selects the USB transfer time-out value. [1,5,10,20sec]
Device Reset Time-out
Selects the USB device reset time-out value. [10,20,30,40 sec]
Device Power-up Delay
This item appears only when Device power-up delay item is set to [manual].
3.2.3 IntelRCSetup

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Advantech ASMB-813I and is the answer not in the manual?

Advantech ASMB-813I Specifications

General IconGeneral
BrandAdvantech
ModelASMB-813I
CategoryServer Board
LanguageEnglish