3
1.2 Features
1. Onboard hardware monitoring: System healthy status including
CPU fan, CPU temperature and system voltages levels are moni-
tored to ensure stable operation, proper system configuration and
management. A remote monitoring interface is reserved for remote
management through Ethernet by using Advantech's SNMP-1000
system management module.
2. ATX soft power switch: Through the BIOS, the power button can
be defined as the "Standby" (aka "Suspend" or "Sleep") button or as
the "Soft-Off" button. Regardless of the setting, pushing the power
button for more than 4 seconds will enter the Soft-Off mode.
3. Power-on by modem (requires modem): This allows a computer
to be turned on remotely through an internal or external modem.
Users can thus access information on their computers from any-
where in the world.
4. Power-on by LAN: This allows you to remotely power up your
system through your network by sending a wake-up frame or sig-
nal. With this feature, you can remotely upload/ download data to/
from systems during off-peak hours.
5. Message LED: Chassis LEDs now act as information providers.
The way a particular LED illuminates indicates the stage the com-
puter is in. A single glimpse provides useful information to the
user.
6. CMOS RAM backup: When BIOS CMOS setup has been com-
pleted, data in the CMOS RAM is automatically backed up to the
Flash ROM. This is particularly useful in industrial environments
which may cause soft errors. Upon such an error occurring, BIOS
will check the data, and automatically restore the original data for
booting.
7. More:
Additional metal bracket for board stabilization
• Power On by Alarm: Powers up your computer at a certain time.
• Virus warning: During and after system boot-up, any attempt to
write to the boot sector or partition table of the hard disk drive will
halt the system. In this case, a warning message will be displayed.
You can then run your anti-virus program to locate the problem.
To Next Page
Loading...
Need help?
General
