PCA-6184, ed. 1 User’s Manual 4
1.3 Specifications
1.3.1 System
• CPU: Intel Pentium® 4/Celeron™ up to 2GHz and the above, FSB 400
MHz
• BIOS: Award Flash BIOS, 4 Mb
• System Chipset: Intel 845
• PCI enhanced IDE hard disk drive interface: Supports up to four
IDE large hard disk drives or other enhanced IDE devices. Supports
PIO mode 4 (16.67 MB/s data transfer rate) and Ultra DMA (100/66/
33 MB/s data transfer rate). BIOS enabled/disabled
• Floppy disk drive interface: Supports up to two floppy disk drives,
5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB and 1.44 MB). BIOS
enabled/disabled
1.3.2 Memory
• RAM: Up to 2 GB in two available 184-pin DIMM sockets. Support
PC 200/266 DDR Memory (ECC supported).
• ECC (parity DRAM only): Modules can detect multi-bit memory
errors. Correction of 1-bit memory errors
1.3.3 Input/Output
• Bus interface: PCI/ISA bus, PICMG compliant.
• Enhanced parallel port: Configurable to LPT1, LPT2, LPT3, or dis-
abled. Standard DB-25 female connector provided. Supports SPP/EPP/
ECP
• Serial ports: Two RS-232 ports with 16C550 UARTs (or compatible)
with 16-byte FIFO buffer. Supports speeds up to 115.2 Kbps. Ports can
be individually configured to COM1, COM2 or disabled
• Keyboard and PS/2 mouse connector: One 6-pin mini-DIN connector
is located on the mounting bracket for easy connection to a keyboard or
PS/2 mouse. An onboard keyboard pin header connector is also avail-
able
• ISA driver current: Up to 64 mA high driving current
1.3.4 VGA interface
• Onboard VGA(AGP 4X) controller
• Controller: ATI Rage Pro 128 4XL
• Display memory: 32 MB SDRAM
To Next Page
Loading...