41
3.9.4 VCORE
This shows CPU core voltage.
3.9.5 +5V/+12V/-5V/-12V
This shows you the voltage of +5V/+12V/-5V/-12V
3.10 Load Setup Defaults
“LOAD SETUP DEFAULTS” loads the default BIOS settings required
by the system for reliable operation.
3.11 Password Setting
To change the password:
1. Choose the “Set Password” option from the “Initial Setup Screen”
menu and press <Enter>.
The screen will display the following message:
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters. Remem-
ber, to enable the password setting feature, you must first select
either “Setup” or “System” from the “Advanced BIOS Features”
menu.
Please Enter Your Password
Please Confirm Your Password
To Next Page
Loading...
Need help?
General
