AUTOMATIC
11
3 Description of the device
3.1 Device Information
The Saver One Automatic is called PAD or Public Access Defibrillator.
The Saver One Automatic is a FULLY AUTOMATIC external defibrillator meaning that if an arrhythmia that
requires a shock is detected the device will automatically deliver the defibrillation shock. Designed to automatically
detect and analyse the victim's heart rhythm, it is capable of delivering one or more defibrillation shocks if ventricular
fibrillation or ventricular tachycardia (monomorphic or polymorphic with beat> 180) is detected. The energy is supplied
by an exponential truncated biphasic electrical shock (B.T.E.) able to adapt to the patient's thoracic impedance.
The Saver One Automatic is available in two versions:
Saver One 200J (SVO-B0847) – Maximum deliverable energy 200J
Saver One 360J (SVO-B0848) – Maximum deliverable energy 360J
The Saver One is an extremely compact and lightweight portable device; it can be used with two types of battery:
Non-rechargeable battery Li-SOCl
2
(SAV-C0903), which requires no maintenance, is guaranteed to operate
in standby mode for 4 years or carry out a high number of shocks
Rechargeable battery Li-ion (SAV-C0011), recommended for those who use the defibrillator intensively
The Saver One Automatic has been designed to be used not only by medical personnel but also by lay personnel who
have duly completed a training course on cardio-pulmonary resuscitation with the use of the defibrillator (BLS-D). The
Saver One Automatic is equipped with voice commands that instruct the rescuer in every phase of resuscitation. The
device has been designed for rapid use to facilitate use by the user.
The device is built in accordance with directive 2007/47 / EC and complies with IEC/EN 60601-2-4.
The device allows the data to be recorded on an SD Memory Card so that they can be re-displayed on a PC. During the
non-use phase, if battery is installed, the device carries out daily self-tests to verify its functional condition, in order to
guarantee its prompt use in the moment of need. On the keyboard of the device there is a mini LCD display and a two-
colour LED (red / green) through which it is possible to see the outcome of the functional tests and to know the
functional status of the device even if switched off (stand-by mode).
To Next Page
Loading...