AED Saver One - Recording, viewing and archiving the data

AUTOMATIC
34
9 Recording, viewing and archiving the data
The Saver One defibrillator is able to record and store both the SERVICE data of the device and the complete data
of the rescue operations carried out. Data recording and archiving is done automatically (cannot be deactivated by the
user) both on the internal memory of the device and on the memory card when installed.
9.1 Data recording
The internal memory of the Saver One allows the storage of up to 6 hours of environmental recordings (audio), ECG
tracing, patient data (FC and Ω) and all rescue events. The stored data can be viewed on a PC using the PC Saver View
Express software (SAV-C0019).
Two types of files are stored on the external memory SD Card:
 AED1LOG.txt This file stores all the automatic self-tests performed by the device with its outcomes and all
the SERVICE information. This type of file can be viewed on a PC using a simple reading
program.
 AEDFILE.aed This file stores the rescue data such as: environmental recordings (audio), ECG tracing,
patient data (FC and Ω) and all rescue events. This type of file can be redisplayed on a PC
using the PC Saver View Express software.
The number and duration of recordings depend on the capacity of the memory card, below is an example:
Type
Capacity
Stored Data
SD Card
512 MB
Sounds, Events, Parameters, ECG. Service
(AED1LOG + AEDFILE)
1.500 minutes (25 hours)
1 GB
3.000 minutes (50 hours)
2 GB
6.000 minutes (100 hours)
SDHC Card
4 GB
12.000 minutes (200 hours)
9.2 Archiving data on PC
The rescue data recorded by the Saver One defibrillator can be stored, analyzed and printed from a Personal Computer
using the management software Saver View Express.
For more details on the PC Saver View Express software, consult the relevant user manual.
Image 20