AED Saver One - Alarms Table; Controls and Indicators; Data Memory

AUTOMATIC
39
11.4 Alarms table
Priority
Cause
Visual signal
HIGH
Device ready to deliver the shock
LED Shock Icon flashing
HIGH
Low battery (<1% capacity)
Control LED flashing
11.5 Controls and indicators
Category
Nominal specifications
Buttons
ON / OFF button (device switching on and off)
“i” button INFORMATION
Visual Indicators
• Mini display LCD control of device status
• Device status control LED (bicolour RED / GREEN)
• LED to place defibrillation PADs (2 LED Red)
• LED do not touch patient (2 LED Red)
• LED it is possible to touch patient (1 LED Red)
• LED adult patient (1 LED Green)
• LED paediatric patient (1 LED Green)
• LED ON/OFF button (2 LED Green)
• LED shock indicator AUTO (8 LED Red)
Sound Indicators
Multilingual voices for instructions during use of the device
Acoustic signals of warnings and dangers
Speaker
Pre-set Volume (Emissions in compliance with IEC/EN 60601-2-4 point 6.1)
Min. Variation 20% max 100% (60 dBA to 80 dBA ±3 dBA)
Microphone
Recording automatically activated when device is switched on
11.6 Data memory
Category
Nominal specifications
Internal Memory Capacity
6 hours of environmental audio recording, ECG tracing and events
External memory (optional)
External SD / SDHC memory cards up to 8GB
Archived data
AED1LOG.txt
Daily self-tests, Errors found, Device usage data,
Device information
AEDFILE.aed
Rescue events, voices and environmental noises, ECG tracing of rescue,
Vital parameters of the patient analysed and detected by the Saver One
Data display
Via PC Saver View Express software (Microsoft Windows compatible)