6
HBI. 1011. 4138500_00
ATTENTION
!
The water in the unit and pipes must be drained if the
unit is not used, to prevent the tank, pipes and water
pump from breaking due to the formation of ice.
OFF
Mode ON/OFF
=
Display in stand-by
High voltage
Switch to OFF to cut power supply to the
machine
The On/off indications refer to switch-on and switch-off of
the printed circuits by the users, while cutting the power sup-
ply off means removing the power supply current to the unit
Do not use the unit if there is no water in the tank.
ON
Water tank full
water with unit in
functioning
Do not expose the unit directly to a corrosive
environment, with water or humidity.
Before installation, control that the electric power
used is in compliance with that stated on the iden-
tifi cation plate and check safety of the current.
Technical plate
OUTDOOR UNIT INDOOR UNIT
To Next Page
Loading...
Need help?
General
