AERMEC MODUCONTROL Usage Manual

66
GB
6343841_00 / Ver - 4.20
ADDRESS DESCRIPTION
64 NOT USED
65 Fault condition pre-alarm (APY)
66 NOT USED
67 NOT USED
68 Reverse cycle valve pre-alarm
69 Pre-alarm for high water inlet temperature
70 Pre-alarm for reverse cycle due to high discharge gas temperature
71 NOT USED
72 NOT USED
73 NOT USED
74 NOT USED
75 NOT USED
76 NOT USED
77 NOT USED
78 NOT USED
79 NOT USED
80 NOT USED
81 NOT USED
82 NOT USED
83 NOT USED
84 NOT USED
85 Compressor thermomagnetic switch alarm
86 Fan thermomagnetic switch alarm
87 High pressure switch alarm
88 Flow switch/differential pressure switch (water) alarm
89 Low pressure switch alarm
90 Alarm for absence of NTC1 input probe (SIW)
91 Alarm for absence of NTC2 input probe (SUW)
92 Anti-freeze alarm
93 Alarm for absence of NTC4 input probe (SGP)
94 Alarm for high discharge gas temperature
95 Alarm for absence of compressor delivery transducer
96 High pressure alarm
97 Alarm for absence of NTC3 input probe (SS)
98 Alarm for absence of suction transducer
99 Low pressure alarm
100 Low output alarm
101 Pump thermomagnetic switch alarm
102 High pressure capacity control alarm
103 Low pressure capacity control alarm
104 Discharge temperature capacity control alarm
105 Bemf error alarm (longertek inverter)
106 Alarm for internal communication error (longertek)
107 Overcurrent alarm (longertek)
108 Alarm for absence of load (longertek)
109 Alarm for incorrect voltage (longertek)
110 Alarm for start-up error (longertek)

AERMEC MODUCONTROL Specifications

General

Brand	AERMEC
Model	MODUCONTROL
Category	Control Unit
Language	English