43
EN
Index Function
Function available
on models
24
Indicates that the key lock function is activated on the panel All
25
Indicates that the wired panel is a slave (i.e. two wired panels are connected to the
indoor unit: one master and one slave)
All
26
Indicates that an attempt has been made to use a locked panel using monitoring soft-
ware (MVA MONITORING)
All
27
This icon appears in order to indicate that the filter on the indoor unit must be cleaned All
28
Indicates that the outdoor unit is operating in “safe” mode All
29
Function not available ---
30
Indicates that the outdoor unit is currently defrosting All
31
This icon indicates that the panel was disengaged by a remote controller (zone control,
mains control or MVA MONITORING software)
All
32
Indicates that the X-Fan function is active on the unit (this functions dries the coil in cool
or dehumidification mode)
All
33
Function not available ---
34
This icon indicates that the wired panel controls several indoor units (a group) All
35
Indicates that the Indoor unit is resuming the settings stored in memory (this event occurs
after a black-out)
All
36
Indicates that the indoor unit connected to the panel is the system MASTER All
To Next Page
Loading...
Need help?
General
