64
EN
Set the ANTIFREEZE function on indoor unit:
This function (only in Heat mode) allows setting a minimum room temperature; after setting it, the function is activated automat-
ically if the room temperature falls below 6°C and is then deactivated when the temperature rises above 10°C; to activate or
de-activate this function, perform the following operations:
(1) press the “FUNCTION” key until the icon for this function appears ( ); at this stage, the selected icon will begin to fl ash,
thereby indicating that the function has been selected;
(2) press the “SWING/ENTER” button again to activate the selected function;
(1) (2)
WARNING: to disac vate this func on,
press the “FUNCTION” bu on un l the
func on to be cancelled is selected and then
press the “SWING/ENTER“ button
To Next Page
Loading...
Need help?
General
