63
EN
Set the X-FAN function on indoor unit:
This function is used to dry the coil (only during cool and dehumidifi cation modes) if the unit is switched off before reaching the
desired setpoint, in order to avoid the formation of mould or bacteria on the coil; to activate or de-activate this function, perform
the following operations:
(1) press the “FUNCTION” key until the icon for this function appears ( ); at this stage, the selected icon will begin to
fl ash, thereby indicating that the function has been selected;
(2) press the “SWING/ENTER” button again to activate the selected function;
(1) (2)
WARNING: to disac vate this func on,
press the “FUNCTION” bu on un l the
func on to be cancelled is selected and then
press the “SWING/ENTER“ button