AERMEC WRC1 - Setting Night-Time Comfort Function; SLEEP Function Activation

59
EN
Setting Night-Time Comfort function:
This function manages the unit in relation to a curve will ensure the best comfort together with low noise levels (this function is not
available in AUTO mode or VENTILATION ONLY mode); to set this function, perform the following operations:
(1) press the “FUNCTION” button until one of the icons for the “SLEEP” function appears ( ); at this stage, the selected icon will
begin to fl ash, indicating that the chosen night-time comfort function mode selected is active;
(2) press the “SWING/ENTER” button again to activate the selected function;
(1) (2)
WARNING: to disac vate this func on,
press the “FUNCTION” bu on un l the
func on to be cancelled is selected and then
press the “SWING/ENTER“ button