vii
WARNING
RF hazard
When measuring high VSWR ratios, hazardous voltages may be present on the line due to
standing waves. Under these conditions, it is dangerous to operate the equipment with the covers
removed.
WARNING
Tilt facility
When the equipment is in the tilt position, it is advisable, for stability reasons, not to stack other
equipment on top of it.
Suitability for use
This equipment has been designed and manufactured by Aeroflex to generate low-power RF
signals for testing radio communications apparatus.
If the equipment is not used in a manner specified by Aeroflex, the protection provided by the
equipment may be impaired.
Aeroflex has no control over the use of this equipment and cannot be held responsible for events
arising from its use other than for its intended purpose.
To Next Page
Loading...
